How to install and construct solar powered street lights?

Solar street light is deeply loved by customers because of their good portability, good lighting effects, green environmental protection, no pollution, and unlimited installation. However, many customers do not understand the general installation steps of solar street light. Sunshinelux briefly introduces the installation steps of solar street light for you:

For newly installed solar street light, the installation steps are roughly as follows:
(1) Investigate the road on the spot, carry out the fixed point of the solar street light, and make a mark for later construction work.
(2) Organize personnel and machinery to carry out the construction of pre-buried pits for light poles.
(3) Put in the embedded parts of the light poles (the embedded parts are welded by steel bars to fix the light poles), and pour concrete.
(4) Wait for the embedded parts and concrete to be fixed and prepare for the hoisting of the light pole.
(5) Before the light pole is hoisted, the corresponding battery board, battery board bracket, light arm, lamp and light pole wiring should be installed in place on the ground.
(6) After the installation is in place and the inspection is correct, use a crane to hoist the light pole.
(7) After the hoisting is completed, carry out the lighting test.
(8) After the test is completed, adjust the light pole.
(9) If secondary pre-embedding is required (covering the exposed bolts with cement), no surface treatment is required.
(10) Complete all installation work

Ningbo Sunshinelux lighting Co., Ltd. specializes in the design, production and installation of solar street light systems. Through ten years of technical accumulation and parameter calculation by professional software, it can ensure that the solar street light system meets customer requirements to the greatest extent possible. reduce costs and create greater value for customers.